👉 Watches

There are 1000 posts
Page 28

The new Richard Mille RM27-02 is a sports tourbillon watch designed by Richard Mille for tennis player Rafael Nadal. It not only uses an ultra-light case, but also has super stability to withstand the huge acceleration at the moment of hitting the ball. In the men's 400-meter sprint final at the Rio Olympics, South African athlete Wayde van Niekerk crossed the finish line wearing this watch and won the gold medal. Richard Mille was inspired by the chassis of the racing car and integrated the hollow main plate and case of the movement to greatly improve the impact resistance. In order to make the watch lighter, Richard Mille also cooperated with North Thin Ply Technology to develop a hard and wear-resistant "quartz fiber" ultra-light material to make the case. The weight of the whole watch is like thin paper and has a rough texture like Damascus steel.Through the mirror, you can clearly see the structure of the entire movement. The floating tourbillon is at 6 o'clock, and the Richard Mille unique fast-rotating barrel is at 12 o'clock, which can provide up to 52 hours of power storage and increase kinetic energy efficiency by 20% when winding.The white bezel is fixed to the case by 12 grade 5 titanium screws, with an orange strap and a red crown. In order to improve reading recognition, the ends of the hour and minute hands are also emphasized with bright orange.RICHARD MILLE RM 27-02 watchFull carbon fiber case, sapphire crystal case back, carbon fiber dial, floating tourbillon movement, 19 jewels, power storage hours, woven strap, titanium alloy buckle, waterproof 50 meters.Complex function: tourbillon

JB Factory Richard RM001 True Tourbillon Upgraded Version, the upgrades are as follows: 1. Re-copy the original data, the deck structure is closer to the original, with a similarity of more than 95%; 2. The dial is upgraded to a tempered glass double-layer dial, with a purer color and more delicate details; 3. Upgraded to imported high-grade tape, with fewer burrs, better workmanship, soft and comfortable feel, and the air vents are changed from four horizontal lines to three horizontal lines like the original. This is the first official watch of Richard Mille, and also the first RM true flywheel work in the replica world. It can be bought for only hundreds of thousands of EUR, which should be the cheapest tourbillon among the original RM. The JB factory developers molded the dial according to the original data and restored the original temperament as much as possible. After more than two years of improvement, the double barrels are running normally, and the 12 o'clock position has achieved the same dual kinetic energy display as the original, and the full winding can reach 3 days of endurance. Equipped with a manual true tourbillon movement with the same original structure, the travel time is stable and accurate. The dial is made of double-layer high-pass lens (metal glass + sapphire glass) just like the original one, and the case is processed by the most advanced five-axis CNC technology. The tape is equipped with the original folding buckle, and the power reserve display and tourbillon show the high-end temperament. This is the most attractive Richard style, and it once became the model for other styles of RM Richard Mille men's watches. It is a classic among classics and will never go out of style. JB Factory is another great product after Roger Dubuis Double Tourbillon. The excitement is to be continued. JB Factory-is specially made for high-end tourbillon.

Richard Mille RM52-06 Skull Mysterious Mask watch is evolved from the popular RM52 Skull Bone, a mysterious creation, a mysterious expression. The mysterious mask looks like the masks of Iron Man, Ant-Man, and Spider-Man in "Avengers", and also like a skull model. The anime design adds horror. The black irregular texture carbon fiber shell adds a bit of mystery to the mysterious mask. The fiber shell is wear-resistant, damage-resistant, and does not change color; with a comfortable and breathable rubber strap, the mask is integrated into the sport.

The new RM 27-02 is a sports tourbillon watch designed by 〖RICHARD MILLE〗 for tennis player Rafael Nadal. It not only uses an ultra-light case, but also has super stability to withstand the huge acceleration at the moment of hitting the ball. In the men's 400-meter sprint final at the Rio Olympics, South African athlete Wayde van Niekerk crossed the finish line wearing this watch and won the gold medal.RICHARD MILLE was inspired by the chassis of the racing car and integrated the hollow main plate and case of the movement to greatly improve the impact resistance. In order to make the watch lighter, Richard Mille also cooperated with North Thin Ply Technology to develop a hard and wear-resistant "quartz fiber" ultra-light material to make the case. The weight of the whole watch is like thin paper and has the same rough texture as Damascus steel.Through the mirror, you can clearly see the structure of the entire movement. The floating tourbillon is at 6 o'clock, and the Richard Mille unique fast-rotating barrel is at 12 o'clock, which can provide up to 52 hours of power storage and increase kinetic energy efficiency by 20% when winding.The white bezel is fixed to the case by 12 grade 5 titanium screws, with an orange strap and a red crown. In order to improve reading recognition, the ends of the hour and minute hands are also emphasized with bright orange.RICHARD MILLE RM 27-02 watchFull carbon fiber case, sapphire crystal case back, carbon fiber dial, floating tourbillon movement, 19 jewels, power storage hours, woven strap, titanium alloy buckle, waterproof 50 meters.Complex function: tourbillon

KV Richard Titanium Chronograph RM011 Super Masterpiece RICHARD MILLE RM011 FELIPE MASSA Series🔥After Richard Mille launched the RM011 Red Kite flyback chronograph limited edition last summer, which was named after the football star "FELIPE MASSA", Richard Mille now launches its similar model Black Kite. Black Kite is made of matte black DLC titanium, like a bird hidden in the night, mysterious and sharp. Of course, in addition to the exquisite appearance, this watch is also not inferior in terms of functionality. The rubber strap made of genuine imported materials is superior in both details and hand feel. The Logo part is 100% the same as the original, and a unique buckle with the original synchronous mold is used. The waterproof function has 100% met the requirements.

YS Richard Miller RM52 True Tourbillon is the highest version on the market. It reinterprets the essence of the RICHARD MILLE skull and breaks through the bugs of multiple versions, so that the majority of fans can have a super high replica with correct size, real movement and in-depth details. Reasons to buy:Size is similar: official length, width and thickness: 504316mm, YS factory length, width and thickness: 49.844.316.4mm;, Real bearing: The ruby ​​in the skull's mouth is the real bearing of the tourbillon, not decoration. The gem corresponds to the tourbillon center axis wrapped by the upper and lower jaws, as if swallowing an energy ball, so that the sci-fi artistic conception that the original wants to express can be reflected;Details are in place: The inner wall on the left side of the case inner cover is printed with the RM052 steel stamp like the original, and the size and depth of the right eye gear are close to the original , the center gemstone on the forehead is ruddy and translucent, with a frosted clasp and imported Thai raw rubber strap;Movement alignment: Thanks to the consistent size and position of the tourbillon, from the back of the skull, you can clearly see the operation of the tourbillon with the gemstone coaxial. From the front, the black balance wheel is just blocked by the skull's jaw, leaving only the escape wheel running under the skull;Inside and outside: The movement is a custom-made real tourbillon movement from the Shanghai Movement Factory. Each watch is tested by a high-intensity simulator QE, and is also waterproof.

YS Richard Miller RM52 True Tourbillon is the highest version on the market. It reinterprets the essence of the RICHARD MILLE skull and breaks through the bugs of multiple versions, so that the majority of fans can have a super high replica with correct size, real movement and in-depth details. Reasons to buy:Size is similar: official length, width and thickness: 504316mm, YS factory length, width and thickness: 49.844.316.4mm;, Real bearing: The ruby ​​in the skull's mouth is the real bearing of the tourbillon, not decoration. The gem corresponds to the tourbillon center axis wrapped by the upper and lower jaws, as if swallowing an energy ball, so that the sci-fi artistic conception that the original wants to express can be reflected;Details are in place: The inner wall on the left side of the case inner cover is printed with the RM052 steel stamp like the original, and the size and depth of the right eye gear are close to the original , the center gemstone on the forehead is ruddy and translucent, with a frosted clasp and imported Thai raw rubber strap;Movement alignment: Thanks to the consistent size and position of the tourbillon, from the back of the skull, you can clearly see the operation of the tourbillon with the gemstone coaxial. From the front, the black balance wheel is just blocked by the skull's jaw, leaving only the escape wheel running under the skull;Inside and outside: The movement is a custom-made real tourbillon movement from the Shanghai Movement Factory. Each watch is tested by a high-intensity simulator QE, and is also waterproof.

YS Richard Miller RM52 True Tourbillon is the highest version on the market. It reinterprets the essence of the RICHARD MILLE skull and breaks through the bugs of multiple versions, so that the majority of fans can have a super high replica with correct size, real movement and in-depth details. Reasons to buy:Size is similar: official length, width and thickness: 504316mm, YS factory length, width and thickness: 49.844.316.4mm;, Real bearing: The ruby ​​in the skull's mouth is the real bearing of the tourbillon, not decoration. The gem corresponds to the tourbillon center axis wrapped by the upper and lower jaws, as if swallowing an energy ball, so that the sci-fi artistic conception that the original wants to express can be reflected;Details are in place: The inner wall on the left side of the case inner cover is printed with the RM052 steel stamp like the original, and the size and depth of the right eye gear are close to the original , the center gemstone on the forehead is ruddy and translucent, with a frosted clasp and imported Thai raw rubber strap;Movement alignment: Thanks to the consistent size and position of the tourbillon, from the back of the skull, you can clearly see the operation of the tourbillon with the gemstone coaxial. From the front, the black balance wheel is just blocked by the skull's jaw, leaving only the escape wheel running under the skull;Inside and outside: The movement is a custom-made real tourbillon movement from the Shanghai Movement Factory. Each watch is tested by a high-intensity simulator QE, and is also waterproof.

RM Factory reproduces the extraordinary sports quality of Richard MillerAchieving the integration of material innovation and watch architecture, launching a generation of legendary RM12-01 Tourbillon Sapphire Transparent Edition[Case] ​​A fully transparent case is created by combining sapphire crystal to form a technically coherent and visually inseparable whole.The integrated base plate and case are integrated into one, inspired by the chassis of a racing car, which enhances rigidity and impact resistance.[Dial] The lines are inspired by the structural form of architectural design, and the tubular inclined configuration provides optimal rigidity and torsional rigidity, with excellent resistance to thermal changes and corrosive elements. The base plate supports a grade 5 titanium bridge, which is highly original in terms of three-dimensional structure. This outstanding architectural style can withstand accelerations of more than 5,000 Gs.[Movement] The Swiss standard custom-made tourbillon movement proudly displays the ultimate hand-made refinement of the movement through the sapphire crystal. The playful combination of polished pivots, satin polishing, circular surface treatment and high polishing presents a stunning visual effect. RM has broken through the technical barriers and achieved this masterpiece with a transparent movement, bringing a bright and moving appearance to the RM12-01.

RM Factory reproduces the extraordinary sports quality of Richard MillerAchieving the integration of material innovation and watch architecture, launching a generation of legendary RM12-01 Tourbillon Sapphire Transparent Edition[Case] ​​A fully transparent case is created by combining sapphire crystal to form a technically coherent and visually inseparable whole.The integrated base plate and case are integrated into one, inspired by the chassis of a racing car, which enhances rigidity and impact resistance.[Dial] The lines are inspired by the structural form of architectural design, and the tubular inclined configuration provides optimal rigidity and torsional rigidity, with excellent resistance to thermal changes and corrosive elements. The base plate supports a grade 5 titanium bridge, which is highly original in terms of three-dimensional structure. This outstanding architectural style can withstand accelerations of more than 5,000 Gs.[Movement] The Swiss standard custom-made tourbillon movement proudly displays the ultimate hand-made refinement of the movement through the sapphire crystal. The playful combination of polished pivots, satin polishing, circular surface treatment and high polishing presents a stunning visual effect. RM has broken through the technical barriers and achieved this masterpiece with a transparent movement, bringing a bright and moving appearance to the RM12-01.

RM Factory reproduces the extraordinary sports quality of Richard MillerAchieving the integration of material innovation and watch architecture, launching a generation of legendary RM12-01 Tourbillon Sapphire Transparent Edition[Case] ​​A fully transparent case is created by combining sapphire crystal to form a technically coherent and visually inseparable whole.The integrated base plate and case are integrated into one, inspired by the chassis of a racing car, which enhances rigidity and impact resistance.[Dial] The lines are inspired by the structural form of architectural design, and the tubular inclined configuration provides optimal rigidity and torsional rigidity, with excellent resistance to thermal changes and corrosive elements. The base plate supports a grade 5 titanium bridge, which is highly original in terms of three-dimensional structure. This outstanding architectural style can withstand accelerations of more than 5,000 Gs.[Movement] The Swiss standard custom-made tourbillon movement proudly displays the ultimate hand-made refinement of the movement through the sapphire crystal. The playful combination of polished pivots, satin polishing, circular surface treatment and high polishing presents a stunning visual effect. RM has broken through the technical barriers and achieved this masterpiece with a transparent movement, bringing a bright and moving appearance to the RM12-01.

RM Factory reproduces the extraordinary sports quality of Richard MillerAchieving the integration of material innovation and watch architecture, launching a generation of legendary RM12-01 Tourbillon Sapphire Transparent Edition[Case] ​​A fully transparent case is created by combining sapphire crystal to form a technically coherent and visually inseparable whole.The integrated base plate and case are integrated into one, inspired by the chassis of a racing car, which enhances rigidity and impact resistance.[Dial] The lines are inspired by the structural form of architectural design, and the tubular inclined configuration provides optimal rigidity and torsional rigidity, with excellent resistance to thermal changes and corrosive elements. The base plate supports a grade 5 titanium bridge, which is highly original in terms of three-dimensional structure. This outstanding architectural style can withstand accelerations of more than 5,000 Gs.[Movement] The Swiss standard custom-made tourbillon movement proudly displays the ultimate hand-made refinement of the movement through the sapphire crystal. The playful combination of polished pivots, satin polishing, circular surface treatment and high polishing presents a stunning visual effect. RM has broken through the technical barriers and achieved this masterpiece with a transparent movement, bringing a bright and moving appearance to the RM12-01.